Loading... Please wait...

Attach Quty Tits to a Love Doll



Product Review

I am doing a special project for people who have blow-up love dolls but wish to add a bit more feeling, a bit more realness to the experience. What better way to do that, than by adding some of the best feeling tits toys available to them? I will show you how to attach the Quty Tits boobs toy from TOMAX onto a vinyl love doll. Now this will only work on some blow-up love dolls, in particular they have to be one where you can easily cut out the existing tits and plug up the hole. Since I have one on hand, I’ll be doing this project on my Air Usahane Love Doll by Tokyo Libido, but I do know this is also possible on the Love Body Aki from A-ONE.

Some supplies needed will be:

  • Blow up love doll (i.e., Air Usahane Love Doll)
  • Quty Tits boob toy
  • Scissors
  • Something to write with, fine tip dry erase marker is recommended
  • Super glue
  • Some nice big strips of Velcro. You can also use other brands. I chose white as it will stand out less.
  • Optional: Air Doll Repair Kit.

love-doll-quty-tits-project-02.jpg

Once you have your supplies, make sure you have a nice large flat and sturdy surface to work on. Make sure the love doll is not inflated. Having a bit of air during the next steps is good though, as it allows to easily distinguish the separate layers.

love-doll-quty-tits-project-03.jpg

Now let’s begin the operation. The first step would be to cut the tits of the love doll off. To do that, start by pinching some of the material of just the outside layer of each breast. Take your scissors and cut down on the pinched material. Now you can take your scissors inside and cut the entire boob material out. Be careful not to cut or puncture any other part of the doll. When cutting out the tit material, try to keep some big pieces intact, these can be used later to plug the holes that lets air pass to the tits areas (can also be used to repair any holes that might pop up anywhere else).

Now that you have the tits cut out, you have to plug up some holes so you can still inflate your doll. Each breast on the Air Usahane will have a hole in the middle of the backing material to let air into that breast, these are the holes we are going to plug. For this, you can use a love doll repair kit, or you can use the material you just cut out. Of course it’s always good to recycle so I’ll be reusing some cut material, but I’ll also be using the adhesive from the repair kit because I happen to have some on hand, super glue also works.

love-doll-quty-tits-project-04.jpg

First you want to cut your material to a reasonable size. Something like a square with 1.5”x1.5” sides should be good. Since the boob material has 4 triangle shaped sections, I just cut out a section for each hole I needed to plug and those worked perfectly. Now put your doll on a big, sturdy flat surface. This is important because you want the material to be as flat and flush with the doll as possible to prevent any leaks. Another very important thing when applying the adhesive or glue, do not get any on the middle of the material, otherwise you will likely glue the back of the doll to the front. After sticking the material on, and making sure the front and back of the doll won’t stick together, follow proper drying instructions. This can be a good time to take a break, drink a beer, or masturbate, whatever you like to do to relax. Or you can skip down and start attaching Velcro to the Quty Tits, but don’t do anything else to the doll just yet! Once the doll is patched up and the adhesive/glue has properly dried, inflate the love doll to test for any leakage. If you do have some leaking, you’ll have to patch those leaks up. It’s pretty much the same as plugging the holes, except you don’t have to worry about getting glue inside a hole. After you’ve made sure there are no leaks, put the love doll aside.

love-doll-quty-tits-project-05.jpg

Now take out your Quty Tits toy and Velcro. What we’re going to be doing is cutting out some Velcro to fit under the base of the Quty Tits. First make sure you have enough Velcro to cover the entire underside of the Quty Tits and place one of the tits on top, you can use multiple strips if you need to. This can be the rough hook side, or the soft loop side, but I prefer to attach the loop side on the Quty Tits and the hook side to the doll. Now trace a template on the Velcro you are going to cut. Try not to get any marks on the Quty Tits while doing this! You’ll notice that the Quty Tits have a bit of a droop at the bottom for some nice under-boob, to preserve this make sure you trace inside of this bottom area. Now you want to cut out the Velcro along the insides of the line that you traced. Once you have the pieces cut, without peeling the adhesive cover put it on the Quty Tits and make sure it’s the appropriate size, and make any slight adjustments that you need to. Now you can attach your Velcro piece(s) to the Quty Tits, making sure that it fits nice and flat. At this time, you can make any final cuts to any excess Velcro that might be sticking out. Be careful not to cut the tits! Now that one side is done. Repeat the same to the other side.

Depending on the adhesive used on the Velcro, you may also have to reinforce the adhesive with some additional glue if parts of it just won’t stick. I’ve heard that the adhesive on industrial strength Velcro works pretty well, so you can try that, the Velcro on that is stronger than I prefer however. I tried using some super glue, and it worked. I tested if you can still remove it after a few minutes, and the Velcro was still removable, but it can leave some residue or take tiny pieces of boob with it. This is only on the underside of the tits, and doesn’t seem to cause much trouble in use. If you plan on reapplying Velcro, it’s not a big deal, but if you want to keep the Quty Tits nice, I don’t recommend trying this.

love-doll-quty-tits-project-06.jpg

Now that you have one side of the Velcro attached to the Quty Tits, it’s time to prepare the other side to attach to the love doll. This can be easily done by just attaching the finished tits side to the other side of the Velcro, in my case the hook side. Now just cut along the finished cut pieces, being careful not to cut the tits. If you don’t want to attach the two sides now, you can also use the finished cut side as a template to trace along onto the other side and cut from that.

love-doll-quty-tits-project-07.jpg

Everything is now cut and prepared, so we will finally be attaching the Velcro and ultimately the Quty Tits to the love doll. First check how you want to position the tits on the doll. I believe the best position is slightly above the original position of the tits, lined up with the outside edges. It’s better to have the love doll inflated to see exactly how it would be positioned in the end. If you want to be super accurate when attaching, you can mark the doll at the top, bottom, and sides of the boobs with a marker (make sure it’s erasable if you don’t want to permanently mark the doll). When you’re ready, completely deflate the doll once again. I would recommend reinforcing the Velcro with super glue here. You can stick the Velcro on the doll either while it’s attached to the Quty Tits or just the Velcro itself. Press down firmly for about 30 seconds as the super glue dries. Now the doll is ready! Inflate the love doll and look at the beautiful fruits of your labor! If you notice that they’re a bit off, you can detach the boobs and tweak them a bit for different positioning.

love-doll-quty-tits-project-08.jpg

Now when using the love doll, you have a nice place to grab, or even just watch as they jiggle and bounce around. You can even put the body tights over it. I wouldn’t keep the tights on for too long though, as the oils will bleed into it.

When you’re all done playing, the Velcro allows you to remove the Quty Tits from the doll and put them back in its protective case until you want to use them again.

If you need to wash the Quty Tits, I recommend removing the Velcro from the back to allow proper drying, and reapplying new Velcro.

Posted October 4, 2016.


Find Similar Products by Category


Masturbator 101 Blog